Horizontal Directional Drilling RIG XZ 680 Picture
HDD is a method of installation piping or wiring to crossing
under the road, river,
rail, mountain, with
drilled From Entry
to Exit Point
Side of Entry Point picture
After reaching Exit Point following the pilot bit steering tool is removed and replaced with a reamer and then reamer pullback towards the Entry Point, reamer diameter size shall greater from pipe to be installed.
Pilot Bit Picture
after
reaching Entry Point reamer
Barrels removed and installed in the following Exit Point
swivel and product
pipeline that will be installed. Pullback of the product
pipe exit to
the entry point.
Pilot Bit Picture
Wow this has been a very simple way of explaining directional drilling. The pictures were great and explanatory. I am impressed how you did this with very few words. Thanks for an educational post. http://fullboredirectional.com/about/
ReplyDeleteWow this has been a very simple way of explaining directional drilling. The pictures were great and explanatory. I am impressed how you did this with very few words. Thanks for an educational post. http://fullboredirectional.com/about/
ReplyDeleteThis article is an appealing wealth of useful informative that is interesting and well-written. I commend your hard work on this and thank you for this information. I know it very well that if anyone visits your blog, then he/she will surely revisit it again. Used Drilling Rigs for Sale
ReplyDeleteModern design plants are so important nowadays. Plant design Grand Prarie , Alberta providing best to their clients. Plants design is must if you want to get the best result.
ReplyDeleteDirectional drilling has been practiced by the oil and gas sector since the 1920s. Early directional drilling employed the same fundamental tools as vertical wells, with the exception that the drilling itself was carried out at an angle other than vertical. This procedure has been improved by the use of drill bits that can bend to better accept non-vertical angles in modern directional drilling techniques. The effectiveness and dependability of this procedure have been further enhanced by additional technologies, such as the use of hydraulic jets to guide and alter the drill's path.
ReplyDeleteAs you’re drilling, be sure to keep the drill bit level so that it doesn’t wander off course. It’s also important to apply consistent pressure while you’re drilling. If you find that the drill bit is getting too hot, take a break and allow it to cool down before continuing.read here this guide
ReplyDelete